PANAVISION 35-3 ARRIFLEX CAMERA KIT

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
PANAVISION 35-3 ARRIFLEX CAMERA KIT

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items on eBay, and to buy.

Panavision Europe ARRI 35-3
This listing is for an ARRI 35-3 which belonged to Panavision Europe previously, this camera is configured in Super 35mm format with an ARRI PL mount. As with all Panavision equipment this camera has been incredibly well maintained but does still show the typical signs of ware and tare as it has been used on many major film shoots. This camera was last used on October 2019 for a short film where it preformed without fault whilst passing all recent scratch tests, after receiving the camera I would suggest sending it to a technician to be calibrated as it has laid un used for 6 months.
SOLD AS SEEN NO RETURNS
This Listing Includes:1 x ARRI S35-3 Body1 x Video Tap (un tested)1x Video Tap Door1 x Cinema Electrics Base1 x Carry Handle 2 x 400 Magazine 1 x 1000 Magazine

Basic ARRI 35-3 Tech Specs:
Shutter Angles: 180 172.8 144 135 120
Frame Rate: 24/25 or 30 FPS Crystal 5-50 FPS internal variable5-130 FPS Crystal and variable with external control
Power:12vdc 2.5 amp consumption at 24/25FPS
Operating Temperature Range:-20C to +50C-4F to + 122F

Basic Cinematography Electronics Baseplate Controls Tech Specs:
Crystal Speeds:Crystal FPS push buttons provide crystal speeds in single frame increments when the red knob is set to XTAL, the single red knob can be set to VARI for variable speeds of 3FPS to 100, 120 or 130FPS depending on the camera. The red knob can also be set to 29.97 or 23.976 for crystal speed controlled filming of TV or computer monitors in Europe just shoot at 25FPS.
Battery:1 and 2 green – yellow or red LED indicators indicating the batteries power supply.
Ramp Speed: The ramp speed is factory set but this can be adjusted, its advised to test it with 1000 magazines prior to shooting, the camera must be powered off during adjustment.
Display:The display shows the quantity of film to pass the gate and the FPS.
Reverse:Insert a small screwdriver into the FWD – REV slot beside the fischer plug to set the camera to reverse. The camera must also be adjusted for reverse along with use of correct magazines.
SOLD AS SEEN NO RETURNS

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to buy, and to see similar items on eBay

 

 


Category: Cameras and Photography:Vintage Photography:Vintage Cameras:Movie Cameras
Location: Great Missenden